How I Achieved Maximum Success with

The Importance of Colors of Underground Utility Lines

If you find underground utilities, you can easily determine what type of utility it is for. The risk was high before when people could not easily identify the type of utility lines underneath whenever they dig. There is reduced risks today because of new methods of identifying utility lines although not a complete reduction. If there is a need to dig the ground, it is very important that the utility lines first be identified. Before digging through a certain piece of land, the OSHA requires that the underground utilities be located. It is to prevent disaster. Fatal injuries can happen if underground utility lines are struck. It can also interrupt services in your area where the line is located. Before digging their property, people should call 811 to call the utility companies so that these incidents are prevented. Utility companies can then mark out their respective lines when you call them out.

But, despite the marks, there will sill be accidents. The reality is that there is an incident almost every 6 minutes where utility line are struck. When utility lines are stuck it causes disturbances in traffic lights wastewater pipes, telecommunication lines and more. Public heath and safety is affected when this happens.

With the use of GPR or Ground Penetrating Radar, companies can locate utility lines. When locating utility lines underground, this machine makes it easy to do so. Calling 811 is enough for the property owner to let companies located their lines.

It is easier to identify underground utility lines today because they now use different colors for each utility. Below are some of the colors used for different utility lines.

Proposed excavation sites use white lines. It locates areas that will be excavated in the near future.

If you see pink lines, they are temporary survey markings. These are used by surveyors to mark off legal property boundaries.

If you see red lines, then you can be sure that these are electric power lines, cable, conduit, and lighting cables. The color red is perfect for electric works because it is associated with fire and danger.

If you see yellow lines, then they are lines for gas, oil, steam, petroleum, and gaseous materials. Bright yellow is an appropriate warning color since it is very disastrous to have a natural gas leak.

If you see orange lines, then you should associate this with communication., alarm, signal lines, cable or conduit. If you see blue lines then these are lines for potable water. Purple lines are used for reclaimed water, irrigation, and slurry lines. If you see the color green, then it indicates sewer and drain lines. Hitting this line can truly derail any project for a long period of time.

You can learn more about the color coding of utility lines if you click here now! You can view here for more.